+31 318 727 919

Monday – Friday 8:30 – 17:00

Linear vibrators medium

The medium-sized vibrators produced by De Wilde Triltechniek have a hardened piston and cylinder surrounded by an aluminum housing. The exhaust air is used in this housing as a cooling medium (expansion, air cools after compressed air expands). This further reduces the already low surface temperature of the treads.

Product Consumption L/min Sound level dB Frequency (HZ) Power (N) Amount Quote

LM 35-50

9 65 45 / 75 1900

In stock

LM 35-75

12 62 35 / 55 1640

In stock

LM 35-110

15 57 25 / 40 1810

In stock

LM 45-50

15 65 45 / 75 2920

In stock

LM 45-75

16 62 35 / 55 2450

In stock

LM 45-110

19 58 25 / 40 3320

In stock

LM 60-50

17 62 45 / 75 5530

In stock

LM 60-75

20 60 35 / 55 4310

In stock

LM 60-110

22 55 25 / 40 5130

In stock

Additional products
Product Amount Quote

Combination oil and pressure regulator

In stock

Air care set 1/4″ø8

In stock

Timer valve combination 24V

In stock

Timer valve combination 230V

In stock

Start valve

In stock

Mounting plate LM 35 Steel

In stock

Mounting plate LM 35 Stainless Steel

In stock

Mounting plate LM 45 Steel

In stock

Mounting plate LM 45 Stainless Steel

In stock

Mounting plate LM 60 Steel

In stock

Most important features:

  • Easy to assemble
  • High efficiency with very low air consumption and noise level
  • Maintenance free
  • Frequency and amplitude infinitely adjustable
  • Explosion proof
  • Suitable for oil-containing and oil-free compressed air
  • Compact installation options

*** SOUND ***

All LM vibrators are equipped with an aluminum ABSORBATION HOUSE and are therefore LOW NOISE.

This construction ensures that the tolerances between the treads can be minimal. As a result, the linear vibrators from the LM series have a high efficiency against a very low air consumption and noise level without the use of special seals. One of the main advantages of these linear or piston vibrators is that both the frequency and the amplitude can be steplessly controlled independently of each other over practically the entire range. Piston vibrators, in contrast to rotary vibrators, do not have a ramp-up time and are suitable for pulsating operation.

The outside of the LM vibrators have a special surface treatment, which makes them rust-free and resistant to most cleaning agents.

Applications

The vibrators are very suitable for driving vibrating troughs, vibrating screens and vibrating tables or for mounting on bunkers, silos and funnels for an optimal outflow of your bulk material. Other possible applications include compacting bulk solids in packaging, dosing, sorting, separating or mixing, orienting, deaerating, unblocking, and so on. A start valve is required for HORIZONTAL use.

For the LM series, mounting plates are available in steel and stainless steel.

All our LM vibrators are suitable for the following ATEX zones: ce   II, Cat.2 (2G-2D) T6,zone 1,2,21 and 22